Short codes  For NOKIA

As you may know there are many codes which can be entered in the home-screen of your Nokia S60 device, e.g. to see what firmware your device has. Because there are so many of those, and not everyone does even know of them, we decided to write thisguide for you.
Some of the following codes can reset your phone or change settings, so please make sure to know what you’re doing with entering a code – there’s a description below every code, read it first! Besides the following codes we also give standard knowledge like how to open the Task-manager or switch the profile in an instance.

*#06# displays the IMEI – the serial number – of your phone. On the box of your device there should be the same number on the little sticker on one side of the box.

*#0000# displays the firmware and its date. Additionally there is the type (e.g. RM-159) and the name of your phone. This menu also gives you, if you own a N96, 5800, N85 and some other devices, the chance to update your firmware over the air.

*#92702689# (*#war_anty) displays the “warranty-menu” of your phone. Actually, in S60 it shows the time you spent on calls already.

*#2820# (*#bta_#) displays the bluetooth-address of your device. Every device has another bluetooth-address (works just if it has Bluetooth!).

*#62209526# (*#mac_wlan#) displays the MAC-address of your phone (works just if it has Wireless Lan!).

By pressing 0 (zero) for three seconds on the home-screen you easily can open the web browser.

By pressing the Menu/Home key for three seconds you open the task manager, which shows all opened applications.

Holding # for three seconds on the home screen you change the active profile to silent or back.

In the File manager, Photos application or Gallery you can sent your files really easily by pressing the green-answer key. Once you done that a lists pops up and you can decide whether you want to sent the file via e-mail, Bluetooth, upload it to a service or sent it as a message .

NOTE: The following codes can RESET your phone to the factory settings, all data on it will be deleted!

*#7780# (*#rst_#) does a soft-reset to your phone.

*#7370# (*#res_#) does a hard-reset to your phone.

How to sync an iPhone with two (or more) Computers

(Or, How to sync an iPhone with one computer and manually manage music and videos on another).

Note: This tutorial allows you to add music/videos/podcasts from multiple machines. If you just want to sync PIM (Contacts/Calenders etc) on one machine and media on another there’s a simpler way.  On the computer you want to sync contacts/calendar with select only these items and perform a sync. Now, on the second machine enable Music/Photos/Etc and perform a second sync. You will be warned the media library will be deleted, but as there’s no media this is fine 

Because I do most of my music listening at work and my Calendar/Address book are kept in Outlook I have my iPhone setup to sync with my office PC.  When I’m at home however I find I also want to put music/podcasts/videos on my iPhone for the weekend or trips.

Normally it’s only possible to sync media on an iPhone with one computer. If you try to use a second computer you get the warning below that "the iPhone XXX is synced with another iTunes library. Do you want to erase this iPhone and sync with this iTunes library"?

 

However, I’ve found an easy fix for this. In the instructions below I’ll show how to modify any iTunes Library so it can also be synced with your iPhone. You can then either manually manage your iPhone on a second computer, or sync different data on different machines (E.g. Music at home, Contacts/Calendar at work).

The instructions below use the example of modifying the iTunes library on my home Mac to work with my existing iPhone/PC setup. If your existing library is on a Mac, or both machines are of the same type, then the steps are identical.

Notes

• On the PC you can find your iTunes folder in your "My Music" (XP) or "Music" (Vista) directory. On the Mac it is in your Music directory.
• For the editing part, I recommend UltraEdit on the PC and a combination of TextExit /HexEdit on the Mac. Any hex editor will do, and you only need to edit files on the second machine.
• After completing these steps you will be able to sync your iPhone with both computers, either by normal syncing or choosing one machine to manually manage your music and videos. Unless you also keep your music libraries in sync, I recommend you do not attempt to normal sync the same types of data on both machines.

Backup Your Library

On the machine you want to sync with, backup "iTunes Music Library.xml" and "iTunes Music Library" (Tunes Music Library.itl on PC) to a safe location. These are the files you will be modifying.

1) Find your iTunes Library ID

On the machine your iPhone currently syncs with, open "iTunes Music Library.xml" with a text editor and find the entry between the tags, after "Library Persistent ID". In the example below this is 8B6C633F7DACB74B. Copy this entry exactly to a piece of paper, email, temporary file etc. You can then close this file.

2) Change your Library ID

iTunes stores your library information in two places. An XML file and a binary file. You now need to change the ID in both so they match your other library.

Make sure iTunes is not running.

On the machine you want to sync with open "iTunes Music Library.xml" in a text editor. Again, find the entry between the tags after "Library Persistent ID" and copy this entry exactly. This time you can use the clipboard if you wish.

When you have a copy, replace this entry with the one you copied in part 1. Make sure you do not change anything else, and the length of the entry is 16 characters/digits. Save this file and close it.

In the Hex Editor, open "iTunes Music Library" (Tunes Music Library.itl on PC).

Select "Find and Replace" from the Edit menu. Make sure "Hex" matching is selected (not ASCII). In "Find" enter the ID you took a note of in Part 1. In Replace, enter the ID you copied at the start of Part 2. Choose Replace All, there should be one match.

Save this file and close it.

Success!

Start iTunes on the machine you wish to sync with and plug in your iPhone. When you select "Manually manage music and videos" you will no longer be prompted to erase your data, nor will the files on your iPhone be grayed out.

Additional Notes

Previously I’ve found that intentionally corrupting the binary "iTunes Library" file (e.g. replacing it with a text file) would cause iTunes to regenerate it using the XML data. This no longer appears to work for me in iTunes 7.6.1 and the "repaired" file only contains a few songs. This may be because I keep my music on an external drive but I cannot say for sure. Either way, patching the binary file does not take long and removes any chance of later problems.

DOWNLOAD-- nokia wallpaper

facebook---- likes

Nokia (2690) and some other

View the firmware version of the phone

Dial using the keypad: * # 0000 # – the version number displayed on the display.

V 5.16

22-06-99

NSM-1

V 5.16 – software version

22-06-99 – date

NSM-1 – The hardware (model)

View IMEI

Dial using the keypad: * # 06 # – IMEI number is displayed on the display.

SimClock

Allows you to check whether your SIM-card mode StopClock. When transferring the card to this mode significantly reduces power consumption and thus increases the work of the battery. Generally, all modern SIM-cards support this mode.

*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Blue tooth device address.
*#746025625# Sim clock allowed status.
*#62209526# – Display the MAC address of the WLAN adapter. This is available only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
*#92702689# – takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair – if found (0000)
5. Shows life timer of phone (time passes since last start)

*#3370# – Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* – (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Code activation.
*#4720* – Half Rate Code deactivation. The phone will automatically restart

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.
Unlock service provider: Insert sim, turn phone on and press vol up(arrow keys) for 3 seconds, should say pin code. Press C,then press * message should flash, press * again and 04*pin*pin*pin#

*#7328748263373738# resets security code.
Default security code is 12345

SIM Clock

Stop allowed

Warranty Codes

* # 92702689 # [* # war0anty #]

Enter the menu of warranty codes. In fact, you do not need, but you can find them using the arrows scroll menu.

Menu:

1. Shows the serial number of the device.
2. Date and year of manufacture (eg 0299).
3. Shows month and year of sale (if installed). Here you can set the date, but be careful – it can be done only once in their life phone
4. Date of last repair (if any)
5. Sends all the phone numbers, pictures, and calls from one phone to another (possibly in order to restore). In models with an infrared eye, this procedure works, and through him

EFR CODEC (Enhanced Full Rate)

This function with its inclusion on the idea, should significantly improve the quality of speech, but unfortunately, it must be supported by your connection. When the work is slightly increased power in the phone call (about 5%). How do I know, none of the Russian cellular operators do not support this feature. Principle is based on a different compression algorithm for speech recognition (ACELP) and has a wider bandwidth.

Dial * 3370 # to activate (the phone should reboot) or # 3370 # to deactivate this function.

HR CODEC (Half Rate)

Substantially impairs the quality of speech, but saves battery somewhere at 30%. Again, must be supported by a mobile operator. American networks that support this feature, I do not know.

Dial * 4720 # to activate (the phone should reboot)

or # 4720 # to deactivate this function.

“The secret” button “Power” (61hh, 7110)

If you briefly press the button of your phone, you get to the “quick change” profiles (custom settings). Very handy feature, which personally I often use. Her “documented” in the model 7110.

“The Secret” 54 #

If you are using a SIM-card memory for storing notebook, then knowing the exact address of the phone number in the memory (number of cells in the SIM-card) is the ability to quickly extract the necessary number to the clipboard dialing apparatus. Simply dial the cell (eg, 6) and press # (bars). The number immediately appears on your screen.

Error in the microcode (61hh)

This error does not lead to any serious consequences, and with normal use of the phone “on purpose” will not happen ever. Here is a sequence of actions in which it manifests itself – the phone just reloaded.

1. Log in Calendar (Menu-8)
2. Make a note or reminder
3. Enter some text in the editing window
4. Press and hold the Clear button until the text is empty, then click Back.
5. You will return to main screen, but will appear on the screen space (which you certainly do not see).
6. Enter any 4 digits (eg 1234).
7. Using the arrow keys, move the cursor to the beginning of this line with the numbers (click the down arrow 2 times).
8. Now enter any additional 6 digits and press Send (green tube).
9. Wait a few seconds. Phone flashes illuminated keys and display, and finally reboot.

Answers to some of the other questions you can get by reading Nokia61xx FAQ by 2Pac.

Network Monitor (61xx)

This – the hidden menu in your Nokia phone. If you want to activate this menu, you must use a program that pereprogramiruet some chips in your phone.

For example monitor the network in Nokia 6110:

Check the version of your software. You can continue ONLY if you have 4.33, 4.73 or 5.24!

2. Dismantle EEprom.

3. Choose the program EEProm (ATMEL In 24C64).

4. Read data from EEProm and save in the backup.

5. If you have v4.33, then 4.73, or change address 03B8 from 00 to FF.

6. If you have a v5-24, then changed 0378 to 00 in FF.

7. Write the new data in EEProm, and knitted his back to the portable phone.

8. Turn on your phone and you will have a new menu 10.

Network Monitor gives you the following information:

Number (number) Courier (transportation)

The level of sex workers in dBM

The received signal quality C1 (the criterion of loss of track is used to select the cells and re). Range – 99 to 99

RLT (Break Radio Communication)

The loss of time information on network

TMSI (Temporary Mobile Subscriber Identity)

Identification of Cells (cell ID, the number (number) of the cell)

MCC (Mobile Country Code)

MNC (Mobile Network Code)

LAC (Location Area Code)

Ciphering (vklvykl)

Hopping (vklvykl)

DTX (vklvykl)

Your business card on the display:

Edit menu (Menu 2-7-2-1) to your provider for that – something that you want (3 characters maximum)

Install the unit cost of the phone (Menu 2-7-2-1) to 1

Sign in to limit the cost (Menu 2-7-1-1) like your phone number

Change a profile (3 -…- Menu 3) to its name

How to get new tones calls:

Set SMSC (phone number) 358405202999

Send an SMS with the word: TONES

Send it to number 99999

When you receive a reply (this will improve in the language) you will list of ringing tones.

By selecting one, send it to the same number.

After a while you get the tone.

You can edit a melody, and then bring it to your phone!

New ringtone received. If it works, he should write to New ringtone received.

Scan, enhance, or remove restrictions on the map

Enter * pw +1234567890 +1 – Provider-Lock status

Press (printing) * pw +1234567890 +2 – Network-Lock status

Press (printing) * pw +1234567890 +3 – Provider (???)- Lock status

Press (printing) * pw +1234567890 +4 – SimCard-Lock status

1234567890 (master code) – 10 nine-code zaviseschy by IMEI

Disclosure of the hidden menu nokia 6110

There are two menus for nokia 6100 series, which is not allowed in the normal mode, and only appears when some accessories fitted, namely hands-free kit or car kit.

Please note: Follow the instructions that follow you can deny the guarantee, for which I bear no responsibility.

If you look at the bottom start your phone, you will see 7 contacts.

The inclusion of hands-free menu

If you zakorotite 1 and 2, the contact shall appear the word ‘Headset’. Now you can use the menu 3-6.

Including road menu.

Zakorotite contacts 2 and 3 for a few seconds and you should see the word ‘Car’.

Now you can use the menu 3-7.

Removing Menu

The only way to remove the menu is to choose, choose restoration of factory settings. When asked, enter your security code (by default – 12345). Doing so will rid of the menu, but also received poudalyaet the melody.

A police radar gun. (NOKIA 5110/6110/6150/8850)

In order to detect police radar, do the following steps:

” Options –

” Secret settings – ”

” Group –

Activate and enter the code 00000 then press DC

Now you have to display a new ekonka this means is that if a radius of 1 km. Radar will phone you about this report pikanem (as SMS)

This does not work in some countries!

In some phones you may want to remove SP-Lock, directly through the phone menu!

1. Insert the card of another operator.

2. Turn on your phone and hold the button increases the volume of more than 3 seconds. And then release your telephone asks PIN code?

3. Click the “C”

4. Then press the button as far as times * and 04 * PIN * PIN * PIN #

Phone write PIN-code conversion.

Now, turn off and turn on the phone again. He priymet card!